Table Of Contents
- 1 Tile Grout FAQ
- 2 Most Common Questions Answered about Tile Grout
- 2.1 can i touch up grout the next day?
- 2.2 Can you put new grout on top of old grout?
- 2.3 What is the best tool to use to remove grout?
- 2.4 What Dremel bit to use to remove grout?/Which Dremel bit can I use to remove grout?
- 2.5 What tool do I use to get rid of caulking?/How do I remove old caulk?
- 2.6 Can you apply caulk over old caulk?
- 2.7 What is the best caulk to use around a bathtub?
- 2.8 What will dissolve grout?/Can I Dissolve tile grout?
- 2.9 What Is The Best Grout Sealer?
- 2.10 How do you remove grout haze from tile?
Last Updated on
Tile Grout FAQ
Most Common Questions Answered about Tile Grout
Tile grout is easily one of the most misunderstood parts of a home/office.
This misunderstanding commonly leads to negativity towards it and casts a bad light on tiling in general.
I want to change that by providing you with some education on what grout is and it’s maintanence.
For the past 25 years, I have been tiling professionally and I have played with more grout than a child has with their Play-Dough.
In that time I have applied, repaired and cleaned every type of grout known to man and there isn’t anything grout related that surprises me anymore.
I want to pass that knowledge onto you so that your grout will always be looking it’s best, no matter what.
Commonly Asked Questions About Tile Grout
can i touch up grout the next day?
Generally, you should be okay to mix up some grout and touch up any trouble spots in your new grout.
Stuff like pin holes, scratches or low spots can be touched up with fresh grout the next day. The trick is to blend in the new grout with the old so make sure you mix it the same way that you mixed it the day before.
Can you put new grout on top of old grout?
Short Answer, no way!
Well, there is nothing stopping you from slapping some fresh grout over your dirty old grout, and I am sure people have tried this numerous times.
However, I wish you well in making that new grout stick to the old grout and stopping it from not crumbling away within a few days.
You see tile grout is a solid cementitious substance, in order for it to retain structural integrity, (my wife loves it when I use big words) it requires a minimum thickness for it to cure properly and attain proper strength.
There is a reason why your driveway is made out of thick slabs of concrete, if it was just an inch coating on top of dirt it’d crack and fail the first time you drove your car over it.
The same thing applies to tile grout, which is in it’s simplest form is a fine form of cement with added colors and polymers.
When you grout over the top of old grout, first of all, you’ll find you’ll be washing away most of it with your sponge during the wash-up phase.
This will result in you having to reapply the grout and try again. You’ll be repeating this process ad nauseum until you tear up the sponge in anger and declare war on anything tile related.
Remove the old grout to at least half the thickness of the tile. That is the general rule of thumb recommended by most tile professionals and grout manufacturers.
I have written extensively about the best grout removal tools and grout removal tips. You can find more related articles on the subject if you wish to read more. Just do a search in the search bar above.
For this example, I suggest using a grout saw or an oscillating multi-tool with a grout removal blade attached. Scratch out either the entirety of the grout or at least half the tile thickness.
Make sure to remove all of the old grout from around the edges of the tile as it’ll be visible when you apply the new grout as dark colored patches of dirt. This will ruin the look of your new grout.
If you are unsure about grouting or the tools needed, I have you covered.
Click here to read my complete and highly detailed guide to grouting and repairing grout. It covers all the tools needed and techniques on how to work with tile grout.
What is the best tool to use to remove grout?
There are plenty of great tools for removing grout available to purchase, which tool you use all depends on your time and the size of the job.
(Click the images for more details plus prices)
If you are only doing a small grout repair job or regrouting a bathroom floor for instance, then a grout saw should be adequate for the grout removing task.
Using a special carbide encrusting blade, it tears it’s way through the tough old grout and effectively grinds it into a fine dust.
It does require a lot of effort from you but it’s still a great grout removal tool on a budget.
If you have a Saturday free then dedicate the time to removing your old grout with this little grout removing tool.
For a quick repair of your shower grout, then this will work great.
Being a cordless power tool, it can be used in any environment or situation without problems and with a couple batteries handy, you’ll power through any job – no matter how big or small.
The best part is that the multi-tool does the hard work for you, all you need to do is press the trigger and guide it where it needs to go.
Before I discovered these wonders, I used a grout saw extensively and it made any grout removal job a nightmare as a whole kitchen or dining area would take me all day.
Now I don’t leave home without my DeWalt multi-tool and always make sure to have a few new grout removal blades handy.
If you decide to purchase one for yourself, I suggest you purchase a few different shaped blades to ensure you reach every inch of grout and in terms of large areas, you’ll want a spare blade in case your first one burns out.
If you want to know more about the best grout removal blades for multi-tools, you can read my guide here.
What Dremel bit to use to remove grout?/Which Dremel bit can I use to remove grout?
Questionable English aside, if you really want to use a Dremel to remove grout, I would suggest you go with their dedicated grout removal bit.
It is made of solid carbide and specifically designed to cut through all types of tile grout.
A 1/8 Inch and a smaller 1/16 Inch grout removal bit.
I recommend you look at your grout lines first before making a purchase so that you buy the correct sized one for the job.
Got one in your cart? Good. Now add another one to your total as chances are you will break the first tip from either too much pressure or wearing the carbide out from over-heating.
While the 1/8 Inch grout removal bit holds up fairly well, the 1/16 Inch bit has a tendency to break quickly due to being so thin.
With delicate, precision tools like these, you need to take your time and go slowly. Remember to allow the tool to go at its own pace and not push the Dremel grout removing tool into the grout.
Too much pressure will only result in either burning out the carbide resulting in a drastic reduction in cutting speed or breaking the tip off completely.
Even with the utmost care, you may still find yourself prematurely breaking a bit before all the grout has been removed from the area.
Grab two bits to ensure you complete the grout removal job the first time.
What tool do I use to get rid of caulking?/How do I remove old caulk?
I have seen all sorts of nonsense answers on the internet about how to remove old caulk and it drives me crazy.
Most are ineffective or a waste of time, so I want to point you towards the easiest solution THAT WORKS!
Not only that, but you also have a large variety of caulk removing chemicals that you can apply over the caulk to soften it up and ease the removal process.
Generally, the manufacturers recommend you apply the caulk removing solution and leave it overnight for it to properly bite into the old caulk and release its bond from the surface. Read the label thoroughly in any case.
Apply some of that caulk remover and then use a caulk removal tool to do the rest.
Most are shaped to fit in a corner junction like you would find between a bathtub and tiled wall for example. Slide it onto the caulk, and push it along.
You can then clean up the residue with either a sharp scraper or blade or more of the caulk removing solution.
I will link a great set of caulk removers that work wonders for this sort of thing alongside a trusted caulk removing formula I use myself.
Removing old caulk and silicone is not rocket science.
Like with many tasks, the right knowledge and tools will make the most daunting of home renovation jobs a walk in the park.
Grab these products and get rid of that old silicone and caulk like a true DIY-Home Expert that you are.
Can you apply caulk over old caulk?
This is a similar question to the one about applying grout over old grout but I want to clarify a few things.
It’s like sweeping up and hiding the dirt under a rug. Just because you hid it, doesn’t mean you made the problem go away.
Ask yourself; why are you wanting to apply the new caulk in the first place?
The usual answer will be either that the old caulk is dirty, is coming off in places or you don’t like the color.
You got to remember that caulk is not only decorative but a moisture barrier and is applied in expansion joints.
Simply slapping some new caulk over the old will not solve your problem, it will only delay the effects for a while before it’ll need redoing or touching up again.
Besides that, with a new bead of caulk over the old one, you’ll have a big ugly slug of a caulk line that will look terrible.
I highly recommend you follow the instructions on the question above “what tool do I use to get rid of caulking” and get rid of all the nasty old caulk.
With a fresh and clean surface you can apply a new bead of caulk and be safe in the knowledge that you have done it correctly and it will last much longer than if you simply covered up the problem.
What is the best caulk to use around a bathtub?
The best caulk to use around a bathtub, shower or any wet area would be one consisting of 100% Silicone rubber.
Silicone is designed to stick to most surfaces and most importantly: keep water out and resist mould.
In a wet area, the last thing you want is water getting behind the bathtub, between the tiles etc and causing damage where you can’t see it.
Lastly, bathtubs are not solid. They tend to move when filled with water or when you get in them. When they shift downwards, you need a flexible material that can tolerate that movement without fraying or ripping.
Silicone caulk is flexible enough to withstand general movement throughout its entire lifetime.
Standard caulks dry up to a solid mass and crack when put under the same strain.
That is why I always use pure silicone caulk for any wet areas and all my tile jobs in general, it’s a fool-proof way of getting a lasting and safe joint.
In terms of mould resistance, while most silicones boast abilities of no bacterial growth and the like, I still highly recommend you clean your silicone every week to avoid any build-up of dirt.
Soap scum and body residue can stick to your silicone which allows bacteria and other nasties to grow.
It is made from 100% silicone so it will contain all the qualities I have described above.
Make sure you take note of the color you need so you order the correct one.
This one is white however silicones come in a range of colors to suit every application.
Just do a search on Amazon to find the color you need!
Don’t forget to grab a caulk gun if you don’t already have one as well!
What will dissolve grout?/Can I Dissolve tile grout?
This is a very broad question as it does not define how thick the tile grout is but I am fairly certain I know what this misinformed soul is asking.
Someone is asking what product can be used to dissolve old grout from between tiles. As in, the fully cured cement-hard substance that is between tiles.
So the answer to whether or not you can dissolve grout is a firm no.
There is no compound, product or anything of the like that can liquify grout for ease of removal.
Grout is an enhanced version of cement that once cured, is a solid mass and the curing process cannot be reversed back with the application of component-X.
Believe me, if there was such a product all tilers world-wide would be buying it by the barrel load as it would make our lives a dream.
There are chemicals and acids that help remove grout haze but nothing that can dissolve fully formed grout out of grout lines.
You can technically dissolve grout with a grout removal tool. Like a multi-tool with a grout removal blade attached can reduce the grout to dust but that’s just a play on words.
To this date, you cannot dissolve grout from tiles.
What Is The Best Grout Sealer?
While saying anything is the best is very generalist and subjective, especially in a field as diverse as tiling and grout, I feel that Aquamix has created a sealer that covers the widest spectrum.
It is suitable for all forms of sanded grout and all types of natural stone like marble and granite – to name only a few.
With a non-sheen and natural finish, its a popular choice with homeowners that want a unobtrusive sealer.
I go in detail about all sorts of grout and tile sealers in my best grout sealer buyer’s guide. If you are wanting to learn everything you need about grout sealers, be sure to check it out before you purchase one.
How do you remove grout haze from tile?
Grout haze forms on tiles when it has been allowed to dry onto the surface of the tile during the washing up phase of grouting.
This usually happens when the washing up with a sponge has been rushed and the tiles were not fully cleansed of the excess grout applied during grouting.
Epoxy grout is a notorious candidate for grout haze forming on tiles as it’s a real tough one to clean up properly.
Anyone that has worked with epoxy is nodding their heads right about now and are thinking back to the first time they worked with epoxy.
It was great, wasn’t it? Definitely a learning experience.
Porous tiles with a textured surface are also very prone to grout haze build-up as there is literally no way of cleaning them up properly even with copious washing and buffing after.
Okay, so we know the problem.
Here’s the solution!
Follow the instructions on the packaging and scrub the tiles with the solution, in most cases it should remove any grout hazing left over from the install.
Please note that the longer you leave the grout haze, the harder it will be to remove.
Ideally, grout haze should be removed the next day after grouting or as soon as the grout has cured properly.
You can step up the game with hydrochloric acid.
This is a wonder on grout hazing and other mortar hazing as it effectively removes the residue from the tiles.
This is a powerful acid so if you are going to be using it safety clothing is a must!
Safety goggles and long-sleeved clothing are essential to reduce any burns.
While this is not as potent as pure hydrochloric acid/spirits of salts, I urge you to be very careful with this grout haze remover.
Apply with a scouring pad or brush and give it a good scrub before rinsing with copious amounts of water.
If you want to learn how to prevent grout haze, you can read my guide.